HP PageWide Pro 477dw Printer Installer Driver & Wireless Setup
 |
| HP PageWide Pro 477dw |
Reviews - HP PageWide 477dw is the same size and weight as the 577dw, measuring 18.4 by 20.9 by 16 inches (HWD) and weighing just under 49 pounds, however smaller and lighter than the Epson WF-6590Best Price at Amazon (21.3 by 20.3 by 29.8 inches, 68 pounds). Although so, 49 pounds is a lot for one person to pull out of a box; you'll probably need help getting it onto a sturdy stand or table. Paper capacity is 550 sheets up to legal-size, divided between a 500-sheet cassette and a 50-sheet multipurpose tray. If that's not enough, you can add another 500-sheet drawer, for a maximum of 1,050 sheets.
With a 50,000 page maximum monthly duty cycle and also a recommended duty cycle of up to 4,500 pages, the 477dw is rated well below both the HP 577dw (80,000 pages maximum, 6,000 recommended) and the Epson WF-6590 (75,000 maximum, 5,000 recommended). Of the three, the WorkForce model provides the highest capacity for the lowest purchase price.
Atop the 477dw are a legal-size flatbed scanner and also a 50-sheet single-pass auto-duplexing automatic document feeder (ADF) for copying or scanning two-sided, multipage documents. As a single-pass device, it contains two scanning mechanisms for capturing both sides of the page simultaneously, which is faster than the legacy method of scanning one side, pulling the page back into the ADF, flipping it over, and next scanning the other side.
Environtment/OS Support
OS X 10.7 / OS X 10.8 / OS X 10.9 / OS X 10.10 / OS X 10.11 / Mac OS 10.12 / Mac OS 10.13 / Windows 10 32-bit / 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 64-bit / 8 64-bit / 7 32-bit / 7 64-bit / vista 32-bit / vista 64-bit / XP 32-bit
HP PageWide Pro 477dw Driver and software setup
Step 1: How to Install Driver with free Download, no CD (automatic Wizard)
- You are required to have a driver setup file or software HP PageWide Pro 477dw. To setup the driver files, you simply click the link below to download.
- Must have a USB cable connector from the printer to the computer that you will get from the printer package.
- You must start the computer and printer.
- But, try not to connect the USB cable printer first suggested.
- Download the setup driver and install it on your computer by following all the instructions for the installation progress.
- Connect the USB cable from the printer after installation of driver setup is complete. In this case, the wizard will analyze when USB cable has already been connected. At the time the USB cable has been detected on your computer, it will be directed to the further instructions.
- Ffollow the instructions of the wizard to complete the installation process.
- Once everything is ready, printer can be used for the printing process.
You need to help the option "add a printer" of the built-in features of Windows. And have the Setup file the software & Drivers, also requires USB cable printer.
- Turn on the computer and your printer.
- Connect the USB cable from the printer to your computer.
- Extract the setup file HP PageWide Pro 477dw and also extracted their location (often found in the TEMP folder)
- Click Start à Control Panel a View device & Printer (for Windows 7 and Vista OS). For XP OS, you can click on "Fax & printer.
- Click the "Add a printer."
- After ready and adjusted to the driver's location, provide the path where you extracted the setup files.
- Follow all instructions "wizard" to complete the installation.
- The printer is ready to use on your computer.
Connect with WPS
Requirements:
- Features push-button WPS physically.
- The network should be using WPA or WPA2 security.
Step 1 and 2
- Press the "Home printer"
- Use the navigation arrows to select the icon "WLAN Setup".
- Press the left function.
- The Wi-Fi light will turn on when already enable a wireless connection. The printer searches for access that supports WPS.
Step 3
- Press and also hold the button "WPS" for 5 seconds.
- Press the "OK" button after 2 minutes.
- After the connection is made, press OK to complete the configuration.
- Install software for HP PageWide Pro 477dw.
Step 3 : HP PageWide Pro 477dw Drivers Free Download installation
How to install drivers with software CD (automatic Wizard)- CD/DVD drive, plug it on your personal computer.
- CD Disk Software and Drivers that came with the printer package is required.
- The USB cable as a connector of the printer and the computer.
- After the computer and your Printer is turned on, do not plug the USB cable printer HP PageWide Pro 477dw before needed.
- Insert the CD for the CD/DVD drive in your computer, and follow the Setup wizard from the CD. Follow all the instructions for installation.
- Connect the printer USB cable to the computer when the setup wizard asks you to plug in the USB cable.
- Wait until the printer is detected, the USB cable and follow the wizard instructions to further the process of installation.
- When completed, you will find the printer is ready for use.
HP PageWide Pro 477dw Driver Download
HP PageWide Pro 477dw Multifunction Printer series PCL6 Full Software Solution (Windows 10/8.1/8/7) (32 & 64-bit)
Ver. 38.7 ~ Download
HP PageWide Pro 477 dw Printer Series PCL6 Basic Driver with Installer (Windows 10/8.1/8/7) (64-bit)
Ver. 38.7 ~ Download
HP PageWide Pro 477 dw Printer Series PCL6 Basic Driver with Installer (Windows 10/8.1/8/7/Vista/XP) (32-bit)
Ver. 38.7 ~ Download
HP Universal Fax Driver for Windows (Windows 10/8.1/8/7/Vista) (32 & 64-bit)/XP
Ver. 1.0.321 ~ Download
HP Universal Print Driver for Windows PCL6 (Windows 10/8.1/8/7) (64-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PostScript (Windows 10/8.1/8/7) (64-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PCL6 (Windows 10/8.1/8/7) (32-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PostScript (Windows 10/8.1/8/7) (32-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PCL6 for USB connected printers (Windows 10/8.1/8/7) (64-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PostScript for USB connected printers (Windows 10/8.1/8/7) (64-bit)
Ver. 6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PCL6 for USB connected printers (Windows 10/8.1/8/7) (32-bit)
6.5.0.22695 ~ Download
HP Universal Print Driver for Windows PostScript for USB connected printers (Windows 10/8.1/8/7) (32-bit)
6.5.0.22695 ~ Download
Readiris Pro 14 for HP (Windows 10/8.1/8/7) (32 & 64-bit)/Vista/XP (32-bit)
Ver. Readiris Pro 14 build 7941 ~ Download
HP PageWide Pro 477dw Multifunction Printer series Firmware Update (Windows 10/8.1/8/7) (32 & 64-bit)
Ver. 1743A ~ Download
HP Easy Start for Windows Printer Utility Software (Windows 10/8.1/8/7) (32 & 64-bit)
Ver. 6.5.3442.26 ~ Download
HP Print and Scan Doctor for Windows (Windows 10/8.1/8/7) (32 & 64-bit)
Ver. 5.1 ~ Download
HP Easy Start (Mac OS X 10.9/10.10/10.11/10.12/10.13)
Ver. 2.8.0 ~ Download
Readiris Pro 14 for HP (Mac OS X 10.11/10.10/10.9/10.8)How To Uninstall HP PageWide Pro 477dw Printer Driver
Ver. 14.2.1 ~ Download
- Look for "Windows" key on your keyboard.
- Then select "Control Panel".
- Next you see to Uninstall Programs tab, select.
- Looking for the name of the driver you wish to uninstall.
- Click "Uninstall".
- The uninstall process is complete.
- Open the Apple menu.
- Select "System Preferences".
- Select "printer and scanner".
- Select the drivers who want to uninstall.
- Click Remove.
- The uninstall process is complete
- Go to the application.
- Select "system settings".
- Select "printer". Printer window appears.
- Find the Unlock button at the top right hand, "select".
- Enter "password".
- Looking for a HP PageWide Pro 477dw printer driver you want to uninstall. Find the minus sign below.
- Click the "minus".
0 Comment:
Post a Comment