Samsung ML-1630 Printer Installer Driver & Wireless Setup
 |
| Samsung ML-1630 |
Reviews - Samsung ML-1630 mono laser printer is the printer-only version of the multifunction SCX-4500. Eye-catching aesthetics aside, it's a standard mono laser multifunction. Its value proposition is similar to that of the SCX-450, not great. Samsung ML-1630 is available exclusively through the Apple Store (both online and in-store) through January 2008, so don't bother looking for this printer on discount elsewhere until the partnership ends.
The ML-1630 have the same body as the SCX-4500, minus the scanning unit. It sits 13.1 inches wide, 14.8 inches deep, and just 4.8 inches tall. Because it's just a printer, its control panel is even simpler than the basic one on the SCX-4500. It consists simply of touch-sensitive power and also cancel buttons. If you print, a blue LED display lights up, showing how many total pages were printed. It uses the same 100-page paper cassette, clear plastic output arm, and also toner cartridge as the SCX-4500. The printer ships with a 1,000-page starter cartridge, however replacement toner cartridge is good for about 2,000 prints. This works out to a per-page print cost of approximately 3.5 cents, a bit high for a mono laser.
As far as features go, mono lasers don't generally come with a lot of bells or whistles, and also ML-1630 is no different. A couple of exceptions include the Lexmark E250d, which comes with an autoduplexer, and the Samsung ML-2571N, which comes network-ready.
Environtment/OS Support
OS X 10.3 / OS X 10.4 / OS X 105 / OS X 10.6 / OS X 10.7 / Windows 8 64-bit / 8 64-bit / 7 32-bit / 7 64-bit / vista 32-bit / vista 64-bit / XP 32-bit / XP 64-bit
Samsung ML-1630 Driver and software setup
Step 1: How to Install Driver with free Download, no CD (automatic Wizard)
- You are required to have a driver setup file or software Samsung ML-1630. To setup the driver files, you simply click the link below to download.
- Must have a USB cable connector from the printer to the computer that you will get from the printer package.
- You must start the computer and printer.
- But, try not to connect the USB cable printer first suggested.
- Download the setup driver and install it on your computer by following all the instructions for the installation progress.
- Connect the USB cable from the printer after installation of driver setup is complete. In this case, the wizard will analyze when USB cable has already been connected. At the time the USB cable has been detected on your computer, it will be directed to the further instructions.
- Ffollow the instructions of the wizard to complete the installation process.
- Once everything is ready, printer can be used for the printing process.
You need to help the option "add a printer" of the built-in features of Windows. And have the Setup file the software & Drivers, also requires USB cable printer.
- Turn on the computer and your printer.
- Connect the USB cable from the printer to your computer.
- Extract the setup file Samsung ML-1630 and also extracted their location (often found in the TEMP folder)
- Click Start à Control Panel a View device & Printer (for Windows 7 and Vista OS). For XP OS, you can click on "Fax & printer.
- Click the "Add a printer."
- After ready and adjusted to the driver's location, provide the path where you extracted the setup files.
- Follow all instructions "wizard" to complete the installation.
- The printer is ready to use on your computer.
Connect with WPS
Requirements:
- Features push-button WPS physically.
- The network should be using WPA or WPA2 security.
Step 1 and 2
- Press the "Home printer"
- Use the navigation arrows to select the icon "WLAN Setup".
- Press the left function.
- The Wi-Fi light will turn on when already enable a wireless connection. The printer searches for access that supports WPS.
Step 3
- Press and also hold the button "WPS" for 5 seconds.
- Press the "OK" button after 2 minutes.
- After the connection is made, press OK to complete the configuration.
- Install software for Samsung ML-1630.
Samsung ML-1630 Driver Download
Set IP (Windows 10/8.1/8/7/Vista/XP) (32 & 64-bit)
Ver.
V1.05.08.03:14 ~ Download
ML-1630 Series Print Driver (Windows 7/Vista/XP) (32 & 64-bit)
Ver. V3.04.96:10 ~ Download
ML-1630W Series Print Driver (Windows 7/Vista/XP) (32-bit)
Ver. V3.04.96:07 ~ Download
Universal Print Driver for Windows (Windows 8/7/Vista/XP) (32 & 64-bit)
Ver. V3.00.13.00:04 ~ Download
Universal Print Driver for Windows (Windows 8/7/Vista/XP) (32 & 64-bit)
Ver. V3.00.13.00:04 ~ Download
ML-1630 Series Print Driver (Windows 7/Vista/XP) (64-bit)
Ver. V3.04.96:10 ~ Download
ML-1630W Series Print Driver (Windows 7/Vista/XP) (64-bit)
Ver. V3.04.96:07 ~ Download
ML-1630 Series Print Driver for Mac OS (Mac OS X 10.3/10.4/10.5/10.6/10.7)
Ver. V3.00 - Download
ML-1630W Series Print Driver for Mac OS (Mac OS X 10.3/10.4/10.5/10.6/10.7)
Ver. V2.00 - Download
Smart Panel (Mac OS X 10.3/10.4/10.5/10.6/10.7)
Ver. V2.02.02 ~ Download
Smart Panel (Mac OS X 10.3/10.4/10.5/10.6/10.7)
Ver. V2.02.02 ~ Download
Print Driver (Linux)
Ver. V3.00.65 ~ Download
Print Driver (Linux)
Ver. V3.00.65 ~ Download
Printer Settings Utility (Linux)
Ver. V2.00.23 ~ Download
Smart Panel (Linux)
Ver. V2.00.57 ~ Download
Smart Panel (Linux)
Ver. V2.00.57 ~ Download
Windows:
- Look for "Windows" key on your keyboard.
- Then select "Control Panel".
- Next you see to Uninstall Programs tab, select.
- Looking for the name of the driver you wish to uninstall.
- Click "Uninstall".
- The uninstall process is complete.
- Open the Apple menu.
- Select "System Preferences".
- Select "printer and scanner".
- Select the drivers who want to uninstall.
- Click Remove.
- The uninstall process is complete
- Go to the application.
- Select "system settings".
- Select "printer". Printer window appears.
- Find the Unlock button at the top right hand, "select".
- Enter "password".
- Looking for a Samsung ML-1630 printer driver you want to uninstall. Find the minus sign below.
- Click the "minus".
0 Comment:
Post a Comment